Diesel Mechanic

Western Turbo and Fuel Injection Ltd based in 325 Eagle Drive, Winnipeg, MB R2R 1V4 is looking suitable candidates for the position of Diesel Mechanic who are self-motivated and have good interpersonal skills. In 1979, Western Turbo and Fuel Injection was founded. With the introduction of electronic controls and the start of the emissions control era, this period truly marked the beginning of the technical revolution in fuel injection. Western Turbo saw a gap in the industry as established fuel injection shops were slow to respond to these changes, preferring to stick with the relatively simple mechanical systems that had been around since before WWII.

Our vision was for a shop on the cutting edge of technological change, one that was agile and versatile, incorporated cutting-edge technology, and welcomed change. We value honesty, integrity, and the sharing of our vast knowledge. The candidate who got selected will be required to start work as soon as possible. The vacancies refer to full time or Permanent employment. The selected candidate will be required to work during day shift (08:00 to 17:00)

Employer Name: Western Turbo and Fuel Injection Ltd
Position: Diesel Mechanic
No. of vacancies:1
Salary: $28.00 to $34.00 hourly for 40 hours per week
Employment type: Full time, Permanent employment
Location: 325 Eagle Drive, Winnipeg, MB R2R 1V4

Job Description

  • The candidate will be required to adjust equipment and repair or replace defective parts
  • The candidate will be expected to clean, lubricate, and carry out other maintenance tasks.
  • The candidate must be able to service attachments and work tools.
  • The candidate will be required to troubleshoot and inspect equipment to detect faults and malfunctions
  • The candidate will be required to diagnose faults or malfunctions using computerized and other testing equipment to determine extent of repair required
  • The candidate will be expected to test repaired equipment for proper operation and ensure that the work meets manufacturer specifications.
  • The candidate will be required to keep maintenance reports and documentation
  • The candidate will be expected to train apprentices.
  • The candidate will be required to order parts and maintain inventory
  • The candidate should have Welding experience
  • The candidate will be expected to perform routine preventative maintenance on service trucks, such as inspections, tyre rotations, and oil changes.
  • The candidate will be expected to keep the shop clean and maintain the inventory of parts.
  • The candidate will be expected to work with the repair team to diagnose vehicle problems and plan repairs.
  • The candidate will be responsible for replacing vehicle engines, steering mechanisms, transmissions and braking systems.
  • The candidate will be in charge of inspecting vehicle lighting systems.
  • The candidate will be responsible for following a checklist of inspection procedures.
  • The candidate will be in charge of testing automobiles in order to evaluate their condition.
  • The candidate will be in charge of appropriately interpreting diagnostic test results.
  • The candidate will be in charge of hiring, training, and managing a group of trainees.
  • The candidate will be in charge of using power, machine, and hand tools in a safe manner.
  • The candidate will be in charge of adhering to all motor vehicle repair shop rules and regulations.
  • The candidate will be in charge of presenting reports and plans for approval to clients.

Job Requirements

  • The candidate should be fluent in English or French language
  • The candidate should have minimum qualification of other trades certificate or diploma
  • The ideal candidate should have a minimum 3 to 5 years of working experience in similar industry.
  • The candidate must have 4th Period Apprentice, Workplace Hazardous Materials Information System (WHMIS) Certificate, Driver’s License (Class 3 or D), Automotive Service Licence (310S), Commercial Vehicle Inspection Certificate and Air Brake (Z) Endorsement certificate.
  • The candidate should be a good team player with enough interpersonal and judge-mental skills.
  • The candidate should be organized and flexible in nature.
  • The candidate should be punctual.
  • The candidate should be dependable.
  • The candidate should be reliable.
  • The candidate should give importance to values and ethics.
  • The candidate should have excellent customer service skills.
  • The candidate should have a thorough Criminal record check.
  • The candidate should have good physical and healthy state to perform all tasks quickly, effectively, and efficiently.
  • The candidate should have excellent oral communication
  • The candidate must be able to handle weight up to 45 kg (100 lbs).
  • The candidate should be accurate
  • The candidate should be client focused.
  • The candidate should be well-versed in diesel engine components.
  • The candidate should have strong diagnostic skills
  • The candidate should be knowledgeable about maintenance and repair tools.
  • The candidate should have good problem- solving skills
  • The candidate should have excellent organizational and time management skills.

Diesel Engine Repair Specialization

  • The candidate must be able to perform major internal engine repairs or overhauls.
  • The candidate will be expected to install and align engines and machinery.
  • The candidate will be expected to repair the following systems: air conditioning, fuel injection, engine control, lubrication, cooling, and exhaust systems

Powered Equipment Repair Specialization

  • The candidate will be skilled at repairing pumps and generators.

Mechanical Maintenance and Repair Specialization

  • The candidate will be required to repair the suspension and steering of a wheel-mounted vehicle.
  • The candidate must be able to maintain power take-offs.
  • The candidate must repair and maintain off-road vehicle tyres and wheels.
  • The candidate should be knowledgeable about mechanical and hydraulic transmissions.
  • The candidate should be skilled in the repair of highway vehicle tyres and wheels, differentials, and braking systems.
  • The candidate will be expected to execute drive trains and final drives.

Assembly or Installation Specialization

  • The candidate must assemble mechanical parts into subassemblies.

Own Tools/Equipment

  • Candidates are required to wear steel-toed safety boots, Safety glasses or goggles, gloves etc.

Work Site Environment

  • Work places are completely smoke free
  • The work site environment is noisy.

Transportation/Travel Information

  • For transportation, the candidate should use their own vehicle.
  • The candidate should have valid driver’s licence

Work Conditions and Physical Capabilities

  • This is a fast-paced environment.
  • The candidate should be willing to work under pressure
  • The candidate should be required to perform repetitive tasks on frequent basis.
  • The candidate should be prepared for doing physically challenging tasks as part of daily work.
  • The candidate should be required to handling heavy loads as part of routine work.
  • The candidate should be able to distinguish between different types of sounds.
  • The candidate should have an eye for details.
  • The candidate must have excellent hand-eye coordination.
  • The candidate should be willing to work for long hours in bending, crouching and kneeling positions.
  • The candidate should be willing to work standing position for extended periods.
  • The candidate should ready to work overtime if needed.
  • The candidate must perform manual dexterity tasks.

Work Location Information

  • The candidate will be required to work in shop.

Benefits

  • Health and long-term benefits would be provided to those who were chosen.
  • Under Health Benefits, the selected candidates would get Health care plan, Dental plan and Vision care benefits.
  • Under Long Term Benefits, the selected candidates would get Group insurance benefits, Life insurance, Pension plan and Other benefits

How to Apply

If you are interested in applying, apply through the given options.

By email

[email protected]

By mail

PO Box 98 STN L
Winnipeg, MB
R3H 0Z4

In person

325 Eagle Drive
Winnipeg, MB
R2R 1V4 Between 08:00 AM and 05:00 AM

Note

Please include the following while sending the application

  • Cover letter

 

 

Show More
Back to top button

Adblock Detected

Please consider supporting us by disabling your ad blocker

escortanal escortadana escortadıyaman escortafyon escortağrı escortaksaray escortamasya escortankara escortantalya escortardahan escortartvin escortaydın escortbalıkesir escortbartın escortbatman escortbayburt escortbilecik escortbingöl escortbitlis escortbolu escortburdur escortbursa escortçanakkale escortçankırı escortçorum escortdenizli escortdiyarbakır escortdüzce escortedirne escortelazığ escorterzincan escorterzurum escorteskişehir escortgaziantep escortgiresun escortgümüşhane escorthakkari escorthatay escortığdır escortısparta escortistanbul escortizmir escortkahramanmaraş escortkarabük escortkaraman escortkars escortkastamonu escortkayseri escortkıbrıs escortkırıkkale escortkırklareli escortkırşehir escortkilis escortkocaeli escortkonya escortkütahya escortmalatya escortmanisa escortmardin escortmersin escortmuğla escortmuş escortnevşehir escortniğde escortordu escortosmaniye escortrize escortsakarya escortsamsun escortsiirt escortsinop escortsivas escortşanlıurfa escortşırnak escorttekirdağ escorttokat escorttrabzon escorttunceli escortuşak escortvan escortyalova escortyozgat escortzonguldak escort